What does a torque converter convert into torque, and where is the fill cap?
πŸ‘︎ 7
πŸ’¬︎
πŸ‘€︎ u/shadowed_stranger
πŸ“…︎ Sep 28 2012
🚨︎ report
3d printed torque converter cover reddit.com/gallery/lm7wq8
πŸ‘︎ 58
πŸ“°︎ r/minibikes
πŸ’¬︎
πŸ‘€︎ u/ammar_isaiah
πŸ“…︎ Feb 17 2021
🚨︎ report
Camry with torque converter issues

So I recently bought 2014 Toyota Camry SE. I had 2 mechanics check it, no major issues. I drove it for ~800 miles, it ran great until I started feeling shuddering. I took to a mechanic, who advised me to take it to a Toyota dealership to have the torque converter work on because that model/year has torque converter issues and Toyota will fix it for free. The dealership checked and confirm that is indeed and issue and they will fix it for free.

Should I be worried going forward? The card has ~137k miles on it.

πŸ‘︎ 2
πŸ“°︎ r/MechanicAdvice
πŸ’¬︎
πŸ‘€︎ u/TopWInger
πŸ“…︎ Feb 17 2021
🚨︎ report
85,000 miles and the damn wagon needs a new torque converter...
πŸ‘︎ 11
πŸ“°︎ r/ChevyTrucks
πŸ’¬︎
πŸ‘€︎ u/tscott1034
πŸ“…︎ Feb 19 2021
🚨︎ report
Freshly β€œreman” torque converter
πŸ‘︎ 17
πŸ’¬︎
πŸ‘€︎ u/abr2018
πŸ“…︎ Feb 10 2021
🚨︎ report
New lights and a torque converter for the BT200X reddit.com/gallery/l0aqoz
πŸ‘︎ 21
πŸ“°︎ r/minibikes
πŸ’¬︎
πŸ“…︎ Jan 19 2021
🚨︎ report
Torque converters?

I'm not sure if this is the right place but my 4l60e recently died due too previous owner poorly maintained it. So I've purchased a built 4l60e from jegs and a converter aswell. It's behind a stick 5.3LS for the time being. My question is before I install it all. The torque converter stock is 1400rpm ish and the one I got is about 2400rpm. I don't tow and it's in a Silverado. I am currently building a new 5.3 for this truck but need to get the trans problem fixed first. My question is. Will this torque converter feel ok?

πŸ‘︎ 3
πŸ“°︎ r/EngineBuilding
πŸ’¬︎
πŸ‘€︎ u/Ian-99
πŸ“…︎ Feb 15 2021
🚨︎ report
Come check out a Coleman minibike get a custom stretch, predator 212 and a 30 series torque converter. In this episode we stretch the minibike. youtu.be/cBEpektxeCg
πŸ‘︎ 3
πŸ“°︎ r/minibikes
πŸ’¬︎
πŸ‘€︎ u/stopmyimagination
πŸ“…︎ Feb 22 2021
🚨︎ report
PSA to everyone who hasn't done a r/r on a Honda transmission... thread all the torque converter bolts in 95% of the way and then torque them all.... or you get this
πŸ‘︎ 47
πŸ’¬︎
πŸ‘€︎ u/upstatefoolin
πŸ“…︎ Jan 12 2021
🚨︎ report
Calling all Mopar techs. Help..... Will a 1976 440 work with a 1972 torque converter in a 727 or do I need to do a stall converter to get rid of the vibration? πŸ™πŸΌ
πŸ‘︎ 6
πŸ“°︎ r/Hotrod
πŸ’¬︎
πŸ‘€︎ u/Jeremy-Kurtz
πŸ“…︎ Feb 09 2021
🚨︎ report
My 06 Megacab Laramie, 5.9 Cummins, built auto w/ triple disc torque converter, efi live tuner, BDS steering stabilizer kit, full JL audio with 2 10’s and double din pioneer, 290k
πŸ‘︎ 70
πŸ“°︎ r/Diesel
πŸ’¬︎
πŸ‘€︎ u/Abcouple403
πŸ“…︎ Jan 04 2021
🚨︎ report
Should I use a centrifugal clutch or a torque converter on a 9hp motor?
πŸ‘︎ 5
πŸ“°︎ r/gokarts
πŸ’¬︎
πŸ‘€︎ u/tubamaster420
πŸ“…︎ Jan 17 2021
🚨︎ report
My $2000 wagon that just killed it’s torque converter. It’s still a basket case even if a manual swap it, so it might be time to say goodbye.
πŸ‘︎ 10
πŸ“°︎ r/BMW
πŸ’¬︎
πŸ‘€︎ u/LFE46
πŸ“…︎ Jan 28 2021
🚨︎ report
Hello new here.. I start into work on Go kart as project to have fun. this kart came with old engine kinda worn out it only max speed 16 mph with 9 and 60 tooth sprocket. so i bought 420cc new set of torque converter with it then add 10 to 48 tooth and it goes 45 mph. do you have any advie for me? reddit.com/gallery/kw50u8
πŸ‘︎ 9
πŸ“°︎ r/gokarts
πŸ’¬︎
πŸ‘€︎ u/mattmachine21
πŸ“…︎ Jan 13 2021
🚨︎ report
My 06 mega cab, laraime, 5.9 Cummins, auto with built triple disc torque converter, efi live tuner and a thumping system
πŸ‘︎ 58
πŸ“°︎ r/Cummins
πŸ’¬︎
πŸ‘€︎ u/Abcouple403
πŸ“…︎ Dec 26 2020
🚨︎ report
My 06 mega cab, laraime, 5.9 Cummins, auto with built triple disc torque converter, efi live tuner and a thumping system
πŸ‘︎ 35
πŸ“°︎ r/ram_trucks
πŸ’¬︎
πŸ‘€︎ u/Abcouple403
πŸ“…︎ Dec 26 2020
🚨︎ report
What is a torque converter automatic ?

I am new to this sub reddit.i am 15 years old and i just love learning about cars my dream currently is to become a automobile engineer. this question popped up in my head when i saw mercedes torque converter when the engine was being tore down in the nearby garage .

πŸ‘︎ 3
πŸ“°︎ r/MechanicAdvice
πŸ’¬︎
πŸ‘€︎ u/gabenistrash
πŸ“…︎ Jan 23 2021
🚨︎ report
Torque Converter Stall Speed Question

Don't know if this belongs here or not, but this sub seemed like a great place to start. I've been studying torque converters to increase my knowledge about something I realized I really don't know that much about. This article has been most helpful but has left one question unanswered: are torque converter ratings given for vehicles in stock form? If someone upgrades their brakes, then that would drastically change the stall speed of the converter because the brakes will be able to handle more torque before braking free. If this question doesn't make sense, please forgive me since I'm still learning a lot. It just dawned upon me recently that I've built engines and intimately know many systems on vehicles, but I don't have a firm understanding on the tuning and performance of torque converters, I just know the fundamental concept of fluid couplings and converters. TIA

πŸ‘︎ 15
πŸ“°︎ r/EngineBuilding
πŸ’¬︎
πŸ‘€︎ u/DutchessActual
πŸ“…︎ Dec 15 2020
🚨︎ report
Done for now. Torque converter needed some frame modification. Fresh motor mounts and a shiny exhaust pipe.
πŸ‘︎ 9
πŸ“°︎ r/minibikes
πŸ’¬︎
πŸ‘€︎ u/brycyclecrash
πŸ“…︎ Feb 07 2021
🚨︎ report
2017 GMC Canyon | Transmission / Torque Converter

Hi all,

A few months ago my truck started showing some transmission issues. Specifically not engaging when I would put it in drive, or only engaging when in low but not drive, or vice versa. It has 42k miles on it and has been fine up to this point. I took it to the local Chevy authorized dealer for them to look at it since it was covered under the powertrain.

They replaced the torque converter and sent me on my way but it started acting up within 30 minutes. I got it back to the dealer for another run and after a week they said they couldn't replicate it and it worked fine. Fast forward 24 hours and I backed out of the driveway and that was it. Nothing in D or L.

I'm pretty frustrated about what to do going forward. The local dealer hasn't shown much energy in this. The first time it took a month to get it out and the support has honestly been really lacking. The next nearest GMC certified dealer is quite a ways up and I'm not even sure I can get there. I can tow/haul it.

This is pretty open-ended, but any advice on the best path forward? Thanks for the time and suggestions everyone!

πŸ‘︎ 3
πŸ“°︎ r/MechanicAdvice
πŸ’¬︎
πŸ‘€︎ u/willthing
πŸ“…︎ Jan 12 2021
🚨︎ report
How Does a Torque Converter Work? youtube.com/watch?v=pTfip…
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/Freekmagnet
πŸ“…︎ Feb 08 2021
🚨︎ report
Just hit one year anniversary for my car , loved it every minute.You guys in the states are lucky to get sweeter drivetrains mine is a 1.5 diseal with 115hp mated to a 6speed torque converter. reddit.com/gallery/kzmz8d
πŸ‘︎ 20
πŸ“°︎ r/kia
πŸ’¬︎
πŸ‘€︎ u/tron_genz360
πŸ“…︎ Jan 18 2021
🚨︎ report
Simple kart torque converter question

My two pulleys don't line up exactly. Is it OK to use a 5/8 inch washer on the jackshaft to move that pulley out a little? If not, what do you do to get them lined up?

πŸ‘︎ 3
πŸ“°︎ r/gokarts
πŸ’¬︎
πŸ‘€︎ u/ga-co
πŸ“…︎ Jan 01 2021
🚨︎ report
What type of belt is used in a torque converter?

I'm not sure if there is any specific type or just any ol' belt of the right length would work sorry if it's a simple question just looking for some advice.

πŸ‘︎ 4
πŸ“°︎ r/minibikes
πŸ’¬︎
πŸ‘€︎ u/Wait_Dont_Run01
πŸ“…︎ Dec 27 2020
🚨︎ report
My Mazda has developed a nasty torque converter seal leak, so I had to borrow my boyfriend's project/winter beater until I find something else to drive for the winter... Thought y'all would appreciate :) 5 speed, SL, with popups
πŸ‘︎ 61
πŸ“°︎ r/projectcar
πŸ’¬︎
πŸ‘€︎ u/bado0p
πŸ“…︎ Nov 19 2020
🚨︎ report
Is it the torque converter?

My 2008 Jeep Liberty has a lot of shudder when it shifts gears and also takes a while for my revs to fall when it does upshift. Also, when I’m cruising at ~45 mph it takes a lot for it to accelerate properly. I have to put a solid amount of pressure on it for the revs to climb and my speed to go up. Already changed spark plugs cuz I thought that was the issue but it didn’t help a lot.

πŸ‘︎ 18
πŸ“°︎ r/AskMechanics
πŸ’¬︎
πŸ‘€︎ u/thesoggynapkin
πŸ“…︎ Nov 27 2020
🚨︎ report
Torque Converter shudder or bad coil pack?

My vic is a 92 with the dual coil pack setup, one for each bank. I have been experiencing a light shudder that only occurs after the car has completely warmed up. From what i have noticed it will shudder under 50% throttle and always happens when i initially press the throttle down. I have heard that coil packs failure on these resemble the torque converter issue very similarly. How do i go about testing the coil packs to see if they are failing or tell if its the torque converter thats the issue?

πŸ‘︎ 3
πŸ“°︎ r/CrownVictoria
πŸ’¬︎
πŸ‘€︎ u/undeadexile752
πŸ“…︎ Jan 10 2021
🚨︎ report
Manual transmission - so "good" that virtually all Americans preferred a 2-/3-speed torque converter slushbox.
πŸ‘︎ 79
πŸ“°︎ r/carmemes
πŸ’¬︎
πŸ‘€︎ u/YourOwnBiggestFan
πŸ“…︎ Nov 10 2020
🚨︎ report
LR3 owners w RPM fluctuation - did replacing torque converter work for you?
πŸ‘︎ 21
πŸ“°︎ r/LandRover
πŸ’¬︎
πŸ‘€︎ u/GearMed
πŸ“…︎ Nov 25 2020
🚨︎ report
Nitro with a torque converter facebook.com/marty.chance…
πŸ‘︎ 11
πŸ“°︎ r/dragracing
πŸ’¬︎
πŸ“…︎ Jan 08 2021
🚨︎ report
Why do auto makers put torque converter gearboxes in their high end sports cars ?

So I've seen that Audi uses torque converters in both the brand new RS7 and RS6 and the same goes for the BMW M8 for example when cheaper models such as the audi RS3 or even the S3 have dual clutches and the M2 has a dct gearbox

What's the reason for this ?

πŸ‘︎ 34
πŸ“°︎ r/AskEngineers
πŸ’¬︎
πŸ‘€︎ u/jesaispasjetejure
πŸ“…︎ Nov 14 2020
🚨︎ report
Mb200 mini bike only goes 20moh after replacing torque converter belt

Hello!

So the belt in my torque converter snapped, my friend has an extra one from when his snapped and we replaced it. It was extremely tight to fit on and had to use a Hammer to get it to fit by forcing it over the bolt. When he put his on, he said it fit without a problem with some slack.

I assume that my toque converter is bent out of shape since my friend was able to put the same belt on the same bike without a problem. He even mentioned that it looked bent.

My question is,

  1. Is the tight belt causing this 50% drop in speed or is it something else.

  2. can I just get a slightly bigger belt and have it work normally without replacing the torque converter? My bike worked fine before the original belt broke.

Thank you!

πŸ‘︎ 3
πŸ“°︎ r/minibikes
πŸ’¬︎
πŸ‘€︎ u/shatteringreality
πŸ“…︎ Jan 06 2021
🚨︎ report
Is the 5-speed gearbox torque converter fully automatic gearbox or semi-automatic or robotized gearbox used in the 2006 147 hp mazda 6? I need to know it, thank you all!
πŸ‘︎ 2
πŸ“°︎ r/mazda6
πŸ’¬︎
πŸ‘€︎ u/orgasmdon0r
πŸ“…︎ Jan 19 2021
🚨︎ report
Found these pieces to my starter in the bottom of my torque converter cover. Do I need a new starter? Engine is the Chevy 350 reddit.com/gallery/k0ldji
πŸ‘︎ 4
πŸ“°︎ r/MechanicAdvice
πŸ’¬︎
πŸ‘€︎ u/irontricep
πŸ“…︎ Nov 25 2020
🚨︎ report
ELI5:How does a Torque converter, convert torque?
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/DoggoChrysler
πŸ“…︎ Oct 31 2017
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.