Pretty happy with how my finger coils came out!
Single Coil sized Humbuckers
I saw my wife's keyboard at work and it was horrible, so I made her a YMDK96. Glad it turned out well. Also my first time building from a kit. I got a perfect coil too by using a conduction stove 😂
[GB] 8008 Theme Coil Cable by Bear Cable Co and Giveaway!
###Hello everyone!
#####CABLE PHOTO HERE
#Bear Cable Co. 8008 Theme Cable Group Buy is CLOSED Invoices have been sent!
I hope all of you like my take on the 8008 colorway and its theme, I have created an inspired cable to pair with this cool keycap set.
#####Dixie Mech the creator of 8008 is not affiliated with this project, this is only inspired by their amazingly beautiful work!
-Form will stay open for 24 hours or until all 75 spots are filled
-Once form is closed, invoices will start going out
-You will have 48 hours to send payment
##-Please make sure your PayPal address is correct!
-Time frame for fulfillment is 45-60 days
-Group buy for 7” coil cable in 8008 style. With a 4ft host cable.
-Pricing will be $60 for the Aviator cable, $62 for YC8 cable
-Shipping will be $5 for US and Puerto Rico, $24 for International
-Mini USB and USB C will be available!
#GROUP BUY FORM
...
keep reading on reddit ➡
Finally pulled the trigger on coils
When a kid removed perfectly good Koni yellows to put 180$ Ebay coil overs on to slam the absolute shit out of it. Then sells you them for 40$.
reddit.com/gallery/i6mugx
Looks like Lacuna Coil's Cristina Scabbia plays ESO
If I buried a giant copper coil near some big power lines would the power company notice? Would I be able to get any power from it?
I was thinking about this today because I was watching some physics videos about electromagnetism. If I theoretically made a giant loop of copper wire hundreds of feet wide and then buried it near some big power lines, would there be any noticeable effect on the power company's side? And say if I attached some kind of battery to it, would it be possible to charge it or is there some kind of shielding to prevent the power line from interacting with the metals around it?
Nikola Tesla casually reading by the light of his Tesla Coil.
Already RMA’d mycpu block and gpu, had my gpu block leak, mounting issues everywhere, used the wrong res ports and broke one of my 3.0 headers... I now have broken leds, tornado coil whine and leds are not in sync. NEED TO VENT.
I’m ready! Found a loading coil that will make my 2 foot long 160 meter wire antenna resonant!
ELI5: Why does the spark produced by tesla coil or any electrical discharge shaped like zig zag and not straight?
Tremble World before my electric heating coil of doom!
So I got my first spiral coil... :)
Met a coil boi at work today, he seemed nice
Gonna love the drama jai vs Bogan 😂. Who else here slap some beefy coil on their mtl?
Coil Swap Out at a Hospital
Too many coils for one evening. My fingers ache!
Finally got the leaf springs, coils, shocks, track bar and rims/tires on the Jeep. No driveline vibes!
Dayum, found a 100 coil forever stamps roll in the PO parking lot!!
Made A Model 3 Cabin Air Filter Installation / Coil Foam Tutorial Video After Suffering From A Stinky Summer Air Conditioner
youtu.be/wztZjJkRk1Y
I thought I was pretty big brain until I realized I have to get the coil off the lamp.
[Gear] Jack White showcases his in-progress Custom Tele with single coil Lace sensor, a P-90, a humbucker, a normal B-bender, a bridge mounted high E and G bender with a drop-D hipshot and a stutter/cutoff switch
I just thought it was an amazing number of features packed into a slim Telecaster.
A link to the YouTube video
Question on Coil’s power
How does Coil’s shard simulate things like Taylor’s creativity when he is trying to shoot her in the building he burns down?
The purpose of the shards is so the entities can effectively sandbox their powers in a live environment with creative individuals to test new interactions. However, Coil’s shard (or Contessa’s and other future simulation powers for that matter) are able to perfectly predict what Taylor would do in a situation, implying that the shards are already capable of fully coming up with the same creative simulations as she is. Don’t these things contradict each other?
ST xta coils, 1" lift plates. Will drop it a fat finger before alignment. First suspension diy in a over a decade, the joy and pain!
Gave my curls a little trim yesterday and they’re loving it! Also tried a new finger coil method to get super defined bangs
reddit.com/gallery/i237my
Searching for bands like Coil
Suggest me , please bands like Coil, desirably without vocals, instrumental.
Today I(39F) had my second day of work after having been unemployed for 2months. I got soaked, I'm tired, but I feel fantastic! Here's me cleaning a condenser coil XD
Spent good half of the day winding these coils and soldering this together. QRP Labs 10W Linear PA Kit.
Finally got my coils on, love how it turned out.
Just how many have been killed by Coil's hands?
Okay, we all know that Coil was a sick fuck, his relaxation methods are clear proof of that. So, if we were to count the people murdered in dropped timelines, how many has Coil killed?
New coil shock bike. 14" of travel.
Second experiment: No-knead vs coil fold vs slap&fold - long autolyse edition
Shortened Dipole On The Way. Found some great sites that offer shortened dipole calculators and air coil configuration needed.
On my last post someone said, “It should be required that new bass posts include a video/sound sample.” So here you go. I’m in single coil/J bass mode with a mid-scooped EQ. Track is Wayne Krantz, “Signals” (originally with Anthony Jackson on it, also playing a Fodera).
v.redd.it/3lito9rpttc51
Very loud coil whine even after RMA and PSU change. Im stumped!!
I have GTX 1080 and even while idle I hear faint electrical coil whine. On games even at 60 fps I hear loud really loud buzzing. If it goes 100-200 fps it becomes so loud I can hear it from the next room.
Stranger still, when playing games if I stare up into the sky, it almost disappears, but if I look at anything with complex geometry, it accordingly gets more buzzing. Framerate does not matter.
Now the crazy things:
- I Even RMA from nvidia a refurbished card, Same thing
- I Even swapped out my PSU to another corsair 600w. Same thing
What the heck is going on?? What else could it be?? any help please, as I don't play with Headphones because of hearing issues so I use speakers, and this coil whine is ruining my experience totally !
Is there such a thing as a coil over shock assembly with an electronically adjustable spring rate?
Although my application is not in the realm of automobiles, this community seemed like the perfect place to inquire if such a component exists. I've seen plenty of coil over shocks with electronically adjustable damping, but I'm wondering if a coil over exists where the spring rate can be adjusted electronically as well?
My initial assumption is no since I don't foresee how the mechanical properties of a spring can be in any way altered without removing and replacing the spring, but I'm curious if anyone here knows of such a device that exists.
Has anyone tried that new Necron paint on coils? My first attempt...am hoping I can do the following ones cleaner. C&c always welcome! Help me improve!!!
Hiya! I'm a Hoya newb, and got this 14-inch rooted linearis cutting. To encourage faster growth... Do I coil it around the top of the soil in the pot, or let it hang as-is? Or take a cutting to propagate? Any recommendations regarding care are welcome!
Literally just got all of this for $100usd from a guy that quit, how did i do? I don't even know of to build coils
The way my wife coils the vacuum cord
Renovating old house and found this. It has a metal coil looking thing inside the glass.
Halo 3's hit detection is so bad, it didn't even register that I shot this stationary fusion coil. One bullet is enough to blow them up in H3
v.redd.it/auyy21z2yw751
First Build! Gmk dots with 68g Zealios baby! Time to learn how to coil cables.
When your friend asks why his vape isn't tasting good anymore, he had it for 4 months now with only one coil
Lower diameter coil works awesome on my 8.4V build. Fits in hand almost completely. Around 10 sec heatup time. I see people going for desktop builds and big portables. I went for compact size and portability.
reddit.com/gallery/i7707e
"My coil produces 1.2 million volts" (Waited a while to post my banner just for the pun.)
More lessons learned and another satisfying completion. Now to see if it can stand up to its purpose. (Internal shot not showing corner fix and lower overall coil count)
reddit.com/gallery/i7iey7
After Weeks of Designing and Prototyping, my Coil Bow is ready for release!
Another set of coils I build today. Ohming out at .12 for the set.
'New' COA from GeorgeTown Hemp Farms for their D8. Also spoke to Jon Rincon at the store and he told me they use ceramic coils, its just not stated on their website. 10/10 would reccomend
Did I mention I strongly dislike coil binding? Pretty sure I did...
My Juggerknot V2 RTA finally arrived! Inside are some dual 3mm id Ni80 Fraliens from Coil Clout that came out to 0.112 Ohms. These coils have never look so Blue! I have it sitting on my red Odin DNA250C mod. I’m vaping on some Beard of Zeus.
reddit.com/gallery/i4hv5t
1st Hand Check in a few months. Squid DB V3 with a Mjolnir RDA, murdered out. Love this single coil RDA
YSK - The Gasket Coil Knot - for keeping rope, electric cords, string neat and coiled.
This is so simple I facepalmed literally on seeing it. What I recommend is downloading a knot app that shows step by step, over and over how to do knots.
.
Know first how to coil cord using the twist to make it all even.
You have a circle of cord now.
The Gasket Coil just has you wind the end of your cord around and around the circle the way lots of us already do.
The finisher is to make a small loop before the end, push it up through the top of your circle, pull it over the top and pull it down tight.
.
It's hard to picture and I'd like to include a little video, but that wasn't an option on posting. Just download an app or use https://www.animatedknots.com/coil-unattached-rope-knot
Finally living the low life! Got coils and wheels on last night.
New vaper here, is it save for me to vape on this wattage? I recently purchased this aspire zelos 50w kit and I just changed out the coil for the spare one that came with the vape. It seems like the ohm is quite a bit lower and I noticed not getting any flavour or smoke at lower wattage.
Ok so i was going to put freah coils and cotton in. Did everything the same way like always since (bout 1 year) iam using this Tank (Zeus X). Now it when i hit fire it says "shorted" so i check everything again, changed the coils again, checked the screws... But still the same problem. Help pls
reddit.com/gallery/i8jebj
My girlfriend just asked me to put a new coil in 🤣🤮 omg I've only seen this in pictures online ..the cotton wasn't even connected to the middle cotton anymore 🤣 she wanted me to just make a coil because she didn't want me to see how bad it was smh
First step into vaping to help me get off the cigarettes. Pretty happy with this, but no idea how to get the coil out.
I haven't seen anybody mention this, but I am very curious to see what this device from the gameplay demo is. It is seen at 05:50 in the demo. It is highlighted in Chiefs scan, similar to fusion coils, weapons etc.
NTD I finally sprung for a framing nailer. It's heavier than a paslode but about the same as some coil nailers I've used. Also a new sander because why not?
The new Hard Hitter with 28mm Temple, Coils by Scott 0.14, HohmRUN 21700 and some tasty juice. This is vape heaven.
Found this near an abandoned railroad track. It's a metal coil inside of a glass tube...but what is it for?
Linx Ember, cheap and single coil but wow it has exceeded my expectations. You can really load up on it almost like a tank and when you pull with good force than it creates a vortex down to the coil and you get a lot of vapor
Vapemail with coil shot included
Recommend a Single Coil RDA?
I want to try and add another single coil RDA maybe, but am having a hard time finding a good option. I have several Wasp Nanos and a Tauren One on the way. Was hoping to pick up a Recurve single, but seems to be discontinued. Thought about picking up a Rebirth, but I've read it doesn't vape well as a single coil.
Bonus Points: I've got a Kennedy 24, Asgard Mini, Dang!, Recurve dual, Drop Dead- if you could pick one more dual coil what would you add? Top of the list is a Rebirth or An RDA For Dripping, but would love suggestions.
Thanks!
My First Attempt at a Coil Gun (As a high school senior)
Got my new DBV3 mod & the Peacemaker RTA all by Squid Industries. Inside is a single 3mm Ni80 Interlock Fralien Coil by Coil Clout that came out to 0.23 Ohms.
reddit.com/gallery/i97r6k
Picked up this beauty of an S2k on Saturday. 55,000 miles and its completely stock except for an exhaust which is relatively quiet compared to others. What kind of wheels and coil overs to y’all suggest for just street driving?
Just wound my first pickup coil!
The ejected electron propels the end of hin wire connected to a miniature Tesla coil.
youtu.be/7BXWLbVTcPU
Easy ectoplasm coils. 2 coats Tesseract Glow with a corner highlight of Yriel Yellow.
Recommended coils for That Atty! and TRVP V2. Twiztid Timmy's Radiator Juggernauts
Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.
